Block user

Recent

cgdibble danielsapp's article
Mar 22, 2019 at 7:48
Mar 22, 2019
Spotted: Prototype Maxxis Assegai Tire - Crankworx Rotorua 2019
I just want them to make it in SuperTacky and DD casing.
cgdibble pinkbikeoriginals's article
Mar 21, 2019 at 14:39
Mar 21, 2019
Inside The Tape: Big Gaps & Downhill Carnage - Crankworx Rotorua 2019
Check out below threshold comments, you have one in there under a thread about Tippie. Those comments don't show up when searching on the page. If you have some other comment that is missing, then I have no idea ha
cgdibble danielsapp's article
Mar 20, 2019 at 15:29
Mar 20, 2019
Spotted: Scott Prototype Carbon DH Bike - Crankworx Rotorua 2019
I love it as a front tire for sure. I do wish I could run a DD instead of DH casing on my Sentinel. I have run it with an Aggressor and DHF on the rear. Both were great combos with the Assegai on front.
cgdibble davidarthur's article
Feb 11, 2019 at 7:02
Feb 11, 2019
Review: 2019 Merida One-Twenty 8000
I have come to love the DHF on the rear. Soon I want to try out the DHR2 on front if I could just get ahold of a 29er w/ DD.
Selling
Dec 29, 2018 at 16:43
Dec 29, 2018

Fox 36 Performance 160

$450 USD
Like-new Fox 36 that I tookoff my '19 Sentinel. 160mm travel 15x110 boost axle GRIP damper 44mm offset Steerer tube length: 170mm Buyer pays shipping & paypal fees.

Selling
Dec 29, 2018 at 16:32
Dec 29, 2018

'17 Santa Cruz Nomad 3 Custom Build

$3000 USD
It is time to part ways with my Nomad and since I have moved to a 29er, I have various 27.5 spare bits, too. Frame has small nicks from regular use, but that is it. Wheels have some dents, but the rear has been freshly trued and tensioned. The pivot bearings were replaced early in 2018, and are still doing well, but I also have 2 full sets of replacements for it ready to be dropped in. Frame: 2017 Santa Cruz Nomad 3 CC in black Fork: 2017 Fox 36 170mm HSC/LSC, 15x100 Shock: 2019 Fox DHX2 w/ climb switch and 550 lb spring Rims: WTB Asym i29 32 hole Hubs: DT Swiss 240s Brakes: Shimano XT M8000, 203mm/180mm ice tech rotors Shifter: Shimano XT M8000 Derailleur: Shimano XT M8000 GS Cranks: Raceface Turbine Cinch 170mm Chainring: Raceface N/W 30T cinch Cassette: Sunrace CSMX8 11 sp (black) Chain: Shimano XTR/Dura-ace w/ quicklink Bash/Guide: OneUp Bashguide w/ all extra pieces as well. Tire (front): Maxxis Minion DHF 2.5WT DD casing, MaxxGrip Tire (rear): Maxxis Minion DHF 2.5 DH casing , SuperTackey Seatpost: Rockshox reverb 150mm w/ plunger remote Saddle: Anvl Forge Cromo Grips: Chromag Squareweave XL Bar: Raceface Sixc 31.8x765 Stem: Deity Cavity v2 35mm Headset: CaneCreek 110 Fender: Mucky Nutz The saddle and seatpost are both brand new; I took both of my new bike and never used either. * I'd consider a trade of a rad, aggressive hardtail or short(er) travel trail bike. You certainly wouldn't have to take all of the extras, but I have priced the bike and thrown this stuff in extra because it is of no use to me, and none of it fits my bikes. Extras: - Stan's Flow Mk3 -> Used but in good shape - Misc XT Brake pads, some fresh, some used somewhat. - Both spare derailleur hangers that came with the bike - 2 FULL sets of bearings for the suspension - Rockshox Monarch shock that came on the bike. It ended up with about ~40 hrs of riding. - Raceface N/W Cinch chainring 36T - Fox 20mm axle conversion kit - Oneup BashGuide extra parts/pieces (additional topguides, plus bash guards for different sized chainrings, etc.) - Maxxis HighRoller II 2.3 3C MaxTerra TR/DD - Maxxis Minion DHF 2.5WT 3C MaxxGrip Tr/DD - Maxxis Minion DHF 2.5WT 3C EXO MaxTerra TR - Maxxis Minion DHR II 2.4WT EXO TR Buyer pays shipping/paypal fees.

cgdibble paulaston's article
Dec 19, 2018 at 16:33
Dec 19, 2018
Field Test: Devinci Spartan 29
I don't think so, because it is a big burly 165mm 29er. If I am dropping $10k on a rig like this, yes I would have weight in mind, but I want strength, durability, etc. higher on the list.
cgdibble danielsapp's article
Dec 19, 2018 at 6:17
Dec 19, 2018
Field Test: Trance vs Sensor vs Habit vs SB130
@lj17: I think those are good ideas. Those definitely way into my decisions when looking at bikes. A couple years ago I was looking at an Evil Wreckoning and Nomad3. One of the big items was the frame warranty, the quality of customer service, and bearings. Evil used proprietary bearings (or maybe just much less common ones? I can't remember now), while SC did free bearings for life. I also definitely prefer threaded BBs. It isn't a deal breaker to have pressfit, but I had such a terrible experience with pressfit and just zero issues with the threaded ones since.
cgdibble pinkbikeaudience's article
Dec 15, 2018 at 6:22
Dec 15, 2018
Win a Mongoose Guide Sport Adventure Bike - Pinkbike's Advent Calendar Giveaway
Damn right I'd ride it. It'd be a great commuter for me and I'd definitely take it onto some dirt every once in a while.
cgdibble RyanLeech's article
Dec 14, 2018 at 7:17
Dec 14, 2018
Ryan Leech Offers Free Course on 7 of the Most Common Mistakes Made When Giving Advice
I'm bad at saying "just hit it faster and you can do x, y, and z", especially when it comes to technical sections where increased speed can help you connection sections and such. I try to remember to slow down and look at some lines and talk strategy.
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.054682
Mobile Version of Website