ipsec

Selling my 2011 Scott Voltage FR20 frameset, size long (see below for price(s) and shock options). Rear end spacing is 135mm and can be run with as a 12mm through-axle (included), or standard a QR (not included) with a second set of dropouts that come with the frame. If you haven't read up on the Voltage FR before, it can run different length/stroke shocks to produce different rear travel - an 8.5"x2.5" shock will yield 135mm or 150mm of travel; an 8.75"x2.75" shock will yield 150mm or 170mm of travel; a 9.5"x3" shock will yield 160mm or 180mm of travel. Each different length shock requires a different set of front shock mounts, and all three sets of front mounts will be included in the sale. Purchased this new as a complete bike in early 2011, and rode it as my freeride/DH bike up until last November when I built up a new Norco Aurum. At that point I turned the Voltage into my trail bike. But now I'm building up a Norco Range for trail duty, so the Voltage will see zero use. As you can see from the pics, the frame has been ridden so there are some scratches, nicks, chips, marks and cable rub on the paint. There are no dents or cracks. Here are the shock options I am selling the frame with (price does NOT include shipping): $700 - No shock $750 - Stock Fox Van R COIL, 9.5"x3" (gives 160mm or 180mm travel) $950 - Rockshox Vivid AIR R2C, 8.75"x2.75" (gives 150mm or 170mm travel) - Medium tune Please note, the following: Buyer pays shipping The frame will come with ONLY the following items regardless of which shock option you choose: the short dropouts (-10mm) and 12mm axle, the QR dropouts (I sold the stock length dropouts) all 3 sets of front shock mounts so you can later configure the bike at your expense with any length shock you choose the stock Scott seat tube collar NO headset is included (as can be seen in the pics) Finally, I am not interested in ANY trades. Paypal is preferred unless you live close enough to meet up (tri-state area), and then cash will work.