johnnyloveschickens

Bought it used off here in late 2025, got the build finished in early January, been riding it and realized it’s not for me. Geometry is a bit long and big for me, I like to tinker with suspension which is a bit difficult with the hidden shock. Also, cable outing just isn’t for me. Works perfectly fine, several scratches though and an occasional creak which I believe is coming from the bottom bracket, still useable but getting near the end of its life. Replaced the stock shock with a normal float X factory, so you need to undo the lower shock mount bolts and slide the shock out to access the air valve, I was working on the bike, and the stock shock fell off the workbench and busted the air valve. Bolts are getting a bit worn from me trying to find the aforementioned creak, but still work fine as long as you use the correct size and insert it fully. Upper shock mount rubber cover is missing, though a nicely cut piece of electrical tape works just as well, and rear brake rubber exit is missing from cs, not causing damage at all though. Will leave cable housing in frame, and a string where brake hose goes. Had to replace the worn down lower headset cup pins, JB welded some metal pins in and it works perfectly in both the steep and slack settings. Really good suspension and geometry, just not for me, would fit someone 5’10” to ~6’3”. All bearings are smooth, everything not talked about is in great shape. Includes: frame, all frame hardware, shock, shock cover, headset, rear axle, udh. Can include fork and brakes for 1400 total. Check my other listings, I can give you a discount if you buy multiple things. Thanks! Jonathan

Came off an antique GT Timberline I-Drive that I don't know the year of. 3 chainrings: 28t, 38t, 48t. 170mm length, square taper bottom bracket fitting. Have some scratches, though chainring teeth barely worn at all, and most of the scratches are hidden by the silver finish on the crank arms. Pm me for more details and/or pictures, and check my BuySell page for other things you might want to buy, and I can cut you a deal if you buy multiple things.

2026 Shigura Brake Set. First venture into hydraulic brakes, ridden a few others recently and liked them better. Lever feel, power delivery, and overall design just not for me. Shimano XT levers, one had bladder replaced but works perfectly fine, few scratches. Other lever is basically brand new. Both levers are smooth, no leaks or grittiness of any kind. Magura mt5 calipers, same as mt7 except for black instead of silver finish. Will deep clean outside of brake set before selling. Hoses are trimmed to fit on internal routing 150/160 mm bike, not sure of length exactly, will measure them when I get the chance. Can include brake rotors (200mm diameter, Magura MDR-C center lock), hydraulic fluid (Magura Royal Blood) and bleed kit for extra negotiable price, nothing much though. Possibly trade for SRAM maven, newer hope 4 piston brakes, or Hayes dominion. Selling for price listed, buyer pays shipping and we’ll split PayPal, Venmo, or the fees for whatever money transfer app works. Thanks! Jonathan