Video player is disabled while the embed window is open.
Copy and paste the HTML code below:
Color:
Size: X
|
| |
SWITCH - A quick-change direct mount chainring system.
Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing a chainring much faster and simpler.
Rings can be replaced in less than a minute with only a 4mm allen key, without removing your crank.
ALL the Major Mounting Standard, Sizes and Offsets in both Round and Oval (130 Direct Mount Ring Combinations)
3 Comments
- + 2
siderealwall2
(Mar 7, 2017 at 20:43)
Interesting... Will chainrings break as easily? Seems like the Radius to the bolt is smaller meaning more leverage and potential to snap the bolts. I would be interested in this system but the crank mount is solid for years while I snap a CR 104 bolt every few months on my dirt jumper.
- + 1
@siderealwall2 From the article thread; "The ring drives directly on the carrier on an area quite large compared with a standard BCD mount ring. The bolt does not actually carry any of the pedalling load just holds the parts together and acts as an anti-rotation feature to keep the ring from being able to backpedal out of position"