Northernkonaboy

Used for 1 season. Switched to 1x10.

NIB Wheels Manufacturing threaded press fit bottom bracket, Sram 22/24 mm compatible, ABEC 5 bearings. Often used to fix creaking of press fit BB.

One new and one used (150 kms max, road only) 9 zero 7 front hubs, 135 mm quick release front disc spacing. $30 each, $50 for the pair. 32 holes.

FOR SIZING: I'm 5'8" with a 32" inseam and I have plenty of standover clearance. Most versitile fat bike frame. Runs a 135 mm offset rear but will fit a standard mtb wheel as shown in pic. Salsa Enabler bikepacking fork with braze-ons for anything cages and low rider front racks.. Canecreek 40 headset, Raceface turbine crank, full aluminium, light but strong. 3x10 speed gearing, XT front and X9 rear. Large gearing range for all terrain riding. Formula hydraulic Rx disc brakes, Mulefut 50 rims with Maxxis Chronicle tires on 9 zero 7 / Shimano hubs Origin 8 batwing handle bar but willing to swap in a 3T carbon bar. 26x3.8 fat wheels included, Surly and Shimano hubs, Surly rims and Larry/Nate tire combo. Pedals and water bottle cages not included. Notes: a) frame is belt drive compatible, b) Sizing: I'm 5'8" with 32" inseam with plenty of standover clearance. Named after the area code of Alaska, the 9:ZERO:7 is crafted out of 7005 aluminum and offers a host of features to optimize your fat tire experience. Starting with an elongated head-tube and longer chain-stays, the 9:ZERO:7 features six rack mounts, three water bottle mounts, fender mounts, and full cable housing. Adopting the Pugsley offset chain stay design, the 9:ZERO:7 accepts any standard 135mm mountain hub and offers a perfect chain line. Combined with a 100mm bottom bracket shell, this offers the owner an astounding selection of hub options. Pair whatever rear hub you desire with a rim width of choice, and you are ready for any fat tire adventure. Our sliding rear dropout frame offers the rider tons of options. Pair it with an internally geared hub and belt drive system for a super quiet ride that is ideal in sandy conditions, or run it as a single speed and dial in the perfect chain tension. This frame can be built up to practically anything you can imagine, and you'll be able to take this beast anywhere. While featuring all of the benefits of the original 9:ZERO:7 aluminum frame, the 135mm sliding dropout frame utilizes a hydroformed top tube. This dramatically improves standover height without adding excess weight, making it easier to get on and off the bike in soft snow conditions. A hydroformed down tube is used to enhance fork crown clearance and allows the use of many different kinds of forks. The seatstay length is adjustable between 450mm and 470mm with the sliding rear dropouts, and there is plenty of clearance for a 100mm rim and 4.0″ tire. The frame is anodized black. Frame details: Features hydroformed top tube to increase standover height Utilizes hydroformed down tube to increase fork crown clearance Accepts 100mm rims and 26×4.0 tires 7005 Aluminum with vertical dropouts that slide horizontally along the chainstay and International standard disc tabs The sliding dropout gives a chainstay length of 450-470mm The drive side seatstay split allows for easy installation of a belt drive system Frame dropouts are spaced at 135mm and offset 17.5mm, to the drive side, to compliment a wider chainline created by the use of a 100mm bottom bracket shell. Braze-ons: Eyelets for fenders, upper, lower, and dropout rear rack mounts, top-tube and seatstay guides for use with continuous shifter and brake housing, three water bottle bosses Component specs: 30.9mm seatpost, 35.0mm Constrictor seatpost clamp (included), 100mm bottom bracket shell, top-pull E-type front derailleur, 135mm hub, 44mm threadless headset Features an E-type style front derailleur mount.

XC race bike, many upgraded parts. Purchased to race marathons but never raced. Aluminium frame, press fit bb, 142mm thru axle, Fox float CTD rear shock, spare derailleur hanger, internal cable routing, front derailleur compatible, chain guide mounts, 90 mm travel thru smooth link. Fox 32 front fork, 100 mm travel, 15 mm thru axle, 100 mm spacing. Full XT 1x10 drivetrain Formula R1 brakes DT Swiss 350 hubs, WTB IFrequency rims (23 front, 25 back SRAM carbon crank with wheels manufacturing threaded bb 3T carbon handle bar Carbon seat post Bontrager Kovee saddle New grips No pedals. Tuned and ready to ride. This is a very agile bike with fast steering. Perfect for racing or fast trail rides. If the add is up, the bike is still available.