joemo5 vernonfelton's article
Aug 30, 2017 at 14:49Aug 30, 2017
Slam that Stem? Cane Creek Debuts the "Slamset" - Eurobike 2017
I bet the #slamderson came up with this one
joemo5 TransitionBikeCompany's article
Aug 22, 2017 at 19:22Aug 22, 2017
Giddy Up 2.0: Transition Teases 4 New Bikes - Video
Iv tried it: Halloween dh race. Theres enough wind force to pull a full face hemet off, if it wasn't buckled. Minus that detail it was funny.
Jul 23, 2017 at 14:15Jul 23, 2017
Chromag 36 Tooth 104bcd Truvative 34 Tooth 104bcd
Jul 23, 2017 at 14:07Jul 23, 2017
Jul 23, 2017 at 14:03Jul 23, 2017
Very little use. These were installed on a DH bike: not much pedaling = not much wear and tear. Might have a few extra links for the chain I could toss in.
Jul 23, 2017 at 13:58Jul 23, 2017
Lots of goodies: pick-n-choose what you want. The guide currently has the slider installed. MRP G3 Mini guide $55 G3 Mini Taco (new): $20 Everything pictured: $70
Jul 23, 2017 at 13:46Jul 23, 2017
Industry Nine Torch wheels. Want some of the stiffest wheels out there? These are it. Rear: 150x12mm axle Front: 20mm thu axle Note: I9 sells end caps to fit 157mm rear frame widths. Enduro hoops laced to dh hubs. Perfect for a light weight rider or a weight weenie. No broken spokes, both run true side to side. Rear has one dent/flat spot (shown in pics). Front is perfect. Both have two valve stem holes. I have one extra Grade hoop that I can throw in. Willing to split shipping.
Jul 23, 2017 at 13:22Jul 23, 2017
Spanks Spike Pedals. They have seen some use but the seals are good, bearings smooth and bushings dont have any play. Any imperfections are shown in pics.
Jul 23, 2017 at 13:15Jul 23, 2017
Up for grabs are a pair of raceface atlas cranks. Any imperfections are shown in the pics. $55 I also have a matching X-type bottom bracket that I can throw in. Extra new bearings and seal included. $20 Both are for a 83mm shell. Together: $65
Jul 23, 2017 at 11:58Jul 23, 2017
All bearings replaced in the frame one ride ago. Double barrel rebuilt by Cane Creek and new 300# Valt spring (cuts 1lb over the steel spring) Any imperfections shown in pics. Only big scuff is a rock strike on the bottom of the non drive side mount for the chainstay. Doesn't affect performance. Most of the frame is covered in 3M protective tape. The Viscoset is a steering damper made by cane creek. Its tunable. I can include or swap to the normal 40 series headset I also have an unused Fox shock that I can swap out for the DBcoil if you want to reduce your cost or toss in for a few extra bucks. Included is the bb mount chain guide bracket and an extra derailleur hanger. Check my other ads for parts that fit this frame.
Photo by joemo5
Development Story - Cane Creek's New Helm Fork
17 Feb 2017
Zerode Taniwha - Crankworx Rotorua 2016
10 Mar 2016